Introduction
Scaffolding is a safety-critical product. Whether you are a contractor, distributor or rental company, understanding the standards that apply in your market protects your workers and your business. This guide summarizes what buyers in the US, Europe and Australia/New Zealand should look for. Regulations change—always confirm current requirements with local authorities.
United States: OSHA and ANSI
In the US, OSHA sets workplace safety requirements, while ANSI/SIA standards (such as ANSI/SIA A54 for metal scaffolding) cover design and construction. Buyers should expect load ratings, Guardrail requirements, and clear assembly instructions. Working at height rules are strictly enforced, so documentation and labeling matter.
Europe: EN Standards and CE Marking
Europe commonly references EN 12810 (facade scaffolds) and EN 12811 (performance requirements and general design), and scaffolding placed on the EU market may require CE marking and a declaration of performance under the Construction Products Regulation. Requirements vary, so buyers should confirm current rules with local authorities. For transparency: Jianli does not currently hold CE marking or EN 12810 / EN 12811 certification. If your project is in the EU and needs CE/EN documentation, please tell us your exact requirements before ordering and we will advise honestly on what we can supply. Our existing certifications include AS/NZS 1576 (Australia/New Zealand) and the ISO 9001, ISO 14001 and ISO 45001 management systems.
Australia and New Zealand: AS/NZS 1576
AS/NZS 1576 is the key scaffolding standard in Australia and New Zealand, covering design, erection and use. Systems such as Kwikstage are widely used there. Jianli scaffolding systems are certified to AS/NZS 1576, and we can provide the relevant compliance documents and test reports for AU/NZ projects. Buyers should still confirm that the supplied configuration suits their local requirements.
What Documents to Request From Any Supplier
Regardless of market, ask for: (1) material certificates (steel grade), (2) load test reports, (3) surface treatment specification, (4) assembly and user manual, (5) ISO 9001, ISO 14001 and ISO 45001 or equivalent management system certificates, and (6) a declaration of conformity where applicable. A manufacturer that can provide these consistently is far lower risk than one that cannot.
Why Buying Direct From a Manufacturer Helps
Direct manufacturers control production and testing. Jianli Scaffolding, established in 2005, runs a 40,000 m² facility certified to ISO 9001, ISO 14001 and ISO 45001, and equipped with 100-ton pressure testing equipment, producing ring lock, Kwikstage, cup lock, frame, shoring systems and aluminum towers with OEM/ODM support.
Checklist Before You Order
- Confirm the standards that apply in your country
- Request and verify test reports and certificates
- Specify load, height and surface finish in writing
- Ask for assembly documentation
Questions about compliance? Contact jianli-Candice@outlook.com or WhatsApp +86-13725920210 with your market and requirements.